Turas tiktok: 65W multi outlet quick charge desktop outlet dismantling

2021-09-06

Patch panel is an indispensable thing in people's daily life. With the development of PD fast charging technology, derivatives combining socket and fast charging are constantly launched. But it is strange that even if the 65W fast charging develops so rapidly, the mainstream power of the fast charging socket still stays at about 20W, and there are very few 65W fast charging sockets for consumers.

However, recently, the charging head network has obtained a 65W multi port plug-in board of torras tulas, which is designed and produced by pengyuansheng High Tech Co., Ltd. and has a very fashionable and unique shape. Below, it will be disassembled in detail for your reference.

This socket is equipped with the popular 2c1a interface, which supports 65W, 20W and 18W fast charging respectively, which can meet the rapid charging of laptop and mobile phone at the same time. At the same time, the overall compatibility is also very good. Let's take a look at how this product is doing.

Turas's 65W fast charging socket adopts the shape design of "conveyor belt", which is much more unique than the general straight board socket. The fuselage is smooth and round, with good touch and feel. Equipped with 2c1a interface is the mainstream demand at present. It also supports rich fast charging protocols such as QC, AFC, FCP, SCP, pe2.0 and pd3.0, which can be well compatible with most devices on the market.

In addition, it supports 45W + 18 / 20W dual port fast charging. For example, plug-in cable can meet the fast charging needs of MAC and iPhone 12 at the same time. In addition, it is equipped with three 3 + 2 new national standard sockets, and the maximum carrying power is also designed to 2500W. One socket can carry the power demand of multiple equipment.

The charging head network learned through disassembly that the tulas 65W fast charging socket is not only unique in body shape, but also unusual in internal design. AC module uses PCB board as the bottom welding socket module, and is covered with plastic shell, which has better protection and longer service life. In addition, relay control circuit, charger switching power supply circuit and output DC-DC step-down circuit are designed on two boards respectively.

The switching power supply is composed of Tongjia ld5762e1 with Longteng superjunction MOS tube, lishengmei synchronous rectifier controller with Weizhao vst012n12ms synchronous rectifier tube, and the two secondary step-down circuits at the output end adopt Zhirong sw3516h and sw3517s schemes. The primary side adopts four Aihua capacitors for filtering, and the secondary side adopts Yongming NPX series solid-state capacitors for filtering. The overall material is very reliable.