Challenge the 100 watt fast charging volume limit, iqoo 120W gallium nitride flash charging disassembly

2022-01-17

It is obvious that the mobile phone industry is becoming more and more popular. In addition to the full stack of processors and other components, charging, which was once not very valued, has now become a competitive place for mobile phone manufacturers. The recently released iqoo 9 series mobile phones are all equipped with 120W ultra fast flash charge as standard, among which the Super Cup model iqoo 9 Pro is also equipped with iqoo's new generation 120W gallium nitride flash charge package as standard.

The charging head network learned that iqoo 120W gallium nitride flash charge has built-in two nv6136a gallium nitride power chips of nano micro semiconductor. With the support of this chip, the volume is reduced by 26% compared with the previous generation, the weight is reduced by 35g, and the measured power density is as high as 1.31w/cm ³, Very light.

Iqoo 120W gallium nitride flash charging package will be sold separately on January 15 at a price of 299 yuan. At present, this charging package supports 120W flash charging service for iqoo 8, iqoo 9 and iqoo 9 pro. More models are being adapted in succession, and later pushed through Ota. During the event, iqoo old users can log in to the official website app and rush to buy the charging set in a limited amount for only 99 yuan, with a total number of 20000 pieces.

Speaking of this, many iqoo users must be eager to try, and it's time to fight for speed. Next, the charging head network will first disassemble this charger in detail. Let's take a look at the materials and workmanship of the charger.

Iqoo 120W gallium nitride flash charge is supported by nano nv6136a gallium nitride chip, with a circumference of only 60 * 52 * 29mm and a power density of amazing 1.31w/cm ³, It's not too much for officials to call it a mini charger for such bright data. In addition, the weight and efficiency of the charger are also very bright.

The charger also supports 100-240V ~ 50 / 60Hz global power grid, adopts type-C interface, and is equipped with 1.5m long 6A CC line. In terms of performance, it is compatible with QC2 0、PD3. 0. PPS fast charging protocol, with 5-20v complete fixed voltage gear and 5-20v3 25A wide PPS voltage subset. Therefore, in addition to supporting 11v6a and 20v6a super flash charging to meet the needs of iqoo users, it can also charge digital devices such as laptop, iPad and switch TV base. It can be called the hexagonal warrior in the charger industry. One daily charging is enough.

The charger is manufactured by Kangshu technology, an international well-known manufacturer, and is designed with PFC + high frequency QR switching power supply architecture. It adopts two nv6136a ganfast power chips of nano micro and the synchronous rectifier of Weizhao. The controllers are Ansenmei, dialog and MPs respectively. Likai technology customized protocol IC controls the output voltage of the interface, and Aihua capacitor filter, a well-known domestic brand. The material lineup is quite luxurious. In addition, in addition to the heat sink, the main heating devices are also pasted with heat conduction pads to improve the heat dissipation effect, and the details are exquisite.